Upgrade your FLIR E5 to E8+ Today!
Spend just $190 and get all the advanced features of $3000 FLIR E8 thermal camera on the same day!
Worldwide
We do the upgrade remotely,
you don’t need to send camera to us.
100% Successfully
We do all the steps by ourselves,
you don’t need to have any special knowledge.
100% Safely
We always make a backup copy of the original files.
What the advanced features will be added?
Compare the features of the original FLIR E5 and the upgraded to E8 FLIR thermal camera firmware modification:
IR-RESOLUTION
320 x 240 pixels (76,800 total pixels)
IMAGE MODE
Alignment Distance; Object Distance; Thermal MSX; Thermal; Digital Camera;
+ Resizable Picture in Picture (PIP); Thermal Blending
MEASUREMENT
No Measurements; Center Spot;
+ Auto 3 Spots (Hot+Cold+Center); Auto Hot Spot; Auto Cold Spot; Delta Hot Spot; Delta Hot Spot: Temp
NEW COLOR PALETTES
Iron; Rainbow; Gray;
+ Rainbow High Contrast; Medical; White Hot; Black Hot; Arctic; Lava; Above Alarm; Below Alarm; Interval Alarm; Condensation Alarm; Insulation Alarm
DIGITAL ZOOM
1x (320 x 240 pixels);
+ 2x (160 x 120 pixels); 4x (80 x 60 pixels); 8x (40 x 30 pixels)
TEMPERATURE SCALE
Auto;
+ Manual
RECORDING MODE
Single Shot; Sport;
+ Time Lapse
PROGRAMMABLE BUTTON
Usually only avaliable on expensive FLIR thermal cameras models such as the T6XX Series cameras, etc. You’ll get this feature after the upgrade!
CAMERA INFORMATION
Your camera will be defined as a FLIR E8 model in FLIR Tools (and in reports); on the camera’s information screen and during the bootup.
NO DISCLAIMER
Only our upgrade mod has NO such disclaimer!
Watch the difference
The difference between the original FLIR E5 thermal camera and upgraded FLIR E5 thermal camera to E8 firmware modification with new advanced menu features and 320×240 IR-resolution.
Examples of thermograms
Look how clear are the thermograms after hack to FLIR E8 modification.
Intersection Seam and Insulated Apartment
Electrical Board
Cold Facility
Become a PRO with minimal investment
We’ll do all the steps by ourselves,
so don’t worry about the success!
Upgrade is doing remotely, so you don’t need to send your camera to us. Improve your FLIR E5 thermal camera just in an hour!
Buy the upgrade service for just $190 and get all the advanced features of $3000 FLIR E8 thermal camera on the same day!
Questions? We have answers.
The most frequently asked questions about the updated FLIR thermal imaging cameras and the hack in general.
What is the price for the upgrade service?
Upgrade service for FLIR E5 to E8 costs 190 USD.
Are there any differences in hardware «from the box»?
There are no functional differences in hardware between FLIR E5 and FLIR E8. All restrictions are imposed by software and can be unlocked.
Is there any risk that the upgrade will be lost?
There is no risk that your thermal camera will be flashed back by itself. It is physically impossible. The upgrade may be lost only if you update camera to a newer firmware via FLIR Tools.
Will hack void the warranty?
The manufacturer doesn’t welcome interference in the internal software of the camera, however, if you need to send camera to service, it is possible to return the original software back as we always make a backup copy of the original files.
Can upgrade be done for FLIR Ex PRO models?
No, there is no solution for upgrade these models.
Can you open the second temperature range for Ex models?
Yes, we can open this XT-model’s feature on some common Ex cameras.
Earn money with our Affiliate Program
Tell your colleagues about our service and earn money with every sale!